AUTEX launches commercial solar garden lights for landscaped outdoor spaces

AUTEX has introduced a new commercial solar garden lighting series in Yangzhou, China, aimed at resorts, parks, estates, and pedestrian areas that need attractive lighting without trenching or grid power. The fixtures come in 20W, 30W, and 40W versions and pair solar charging, battery storage, motion sensing, and weatherproof construction.

Why it matters: - The new solar garden lights are designed for commercial landscapes that need decorative lighting without underground wiring, excavation, or continuous grid electricity. - The fixtures target hospitality resorts, botanical parks, private estates, and pedestrian promenades that need uniform light, low glare, and weather resistance. - Standalone solar deployment can cut installation work and reduce ongoing operating costs compared with conventional wired lighting.

What happened: - YANGZHOU AUTEX SOLAR TECHNOLOGY CO., LTD., known as AUTEX, launched a next-generation commercial solar garden lighting series in Yangzhou, Jiangsu, China. - The series is available in 20W, 30W, and 40W models. - AUTEX was established in 2006. - The fixtures combine monocrystalline photovoltaic modules, Grade-A lithium iron phosphate storage, intelligent microcontrollers, and diffusion lenses in a weather-sealed architectural housing.

The details: - The fixtures use a low-profile unibody design intended to blend with modern plazas and classic resort pathways. - The housing conceals wiring, battery compartments, and mounting fasteners for a cleaner appearance. - The optical system uses anti-UV polycarbonate diffusion lenses for 360-degree radial light distribution. - The light output is designed to reduce glare, hot spots, and dark gaps between poles. - Optical shielding directs light downward to limit spill into nearby rooms and surrounding areas. - Luminous efficacy reaches 140 lm/W to 160 lm/W. - Color temperature options include 3000K warm white, 4000K neutral white, and 5700K daylight. - The fixtures are designed to render foliage, stone, water features, and pathways with natural color. - The solar cells use monocrystalline silicon and exceed 21% conversion efficiency. - Anti-reflective glass coatings and bypass diode protection support energy collection in partial shade and overcast conditions. - A Grade-A LiFePO4 battery pack stores energy under an intelligent battery management system. - The battery system manages cell balancing, charge limits, discharge limits, and thermal performance across more than 2,000 deep discharge cycles at 80% depth of discharge. - An MPPT charge controller optimizes solar harvesting with sub-second response speeds. - A PIR sensor and microcontroller enable automatic dusk-to-dawn operation with staged dimming. - The light runs at 30% output at twilight and switches to 100% output for 30 seconds when it detects pedestrians within an 8- to 12-meter range. - The system can sustain nighttime illumination across three to five consecutive rainy or overcast days. - The die-cast aluminum chassis uses thermal dissipation ribs to keep LED junction temperatures below 65 degrees Celsius during extended operation. - A chemical pretreatment, phosphating, and polyester powder coating provide corrosion resistance. - The finish is tested for more than 1,000 hours of salt spray resistance. - The assembly carries IP65 ingress protection and is designed to resist dust, moisture, and insect intrusion. - The fixtures are rated for operation from -20 degrees Celsius to +65 degrees Celsius. - Universal mounting spigots fit standard 60mm and 76mm post-top tenons. - The lights can be installed on 3-meter to 5-meter poles, architectural bollards, or mounting pedestals. - SUS304 stainless steel hardware, silicone O-rings, and locking fasteners secure the unit against wind buffeting. - Dynamic current regulation is intended to lower thermal stress and extend service life beyond 50,000 hours. - Factory production can customize housing finishes and optical lens configurations for specific landscape projects. - More information is available through the official portal.

Between the lines: - The product pitch is aimed at buyers that want a higher-end architectural look, not just basic path lighting. - AUTEX is positioning the lights as a lower-maintenance alternative to conventional grid-tied systems. - The motion-sensing dimming approach suggests the company is balancing brightness with battery conservation. - The technical specifications indicate a focus on long-life outdoor deployment in harsh weather and coastal environments.

What's next: - AUTEX is directing customers to its engineering team for technical photometric files, solar panel specifications, and project integration support. - The company also offers social channels for project follow-up and product updates.